Art in the closet must have been very exciting .....
Panther ⇒ I'm building an electronic hybrid of my Panther
-
Edwin
Autor tématu
- PzKpfw IV

- Příspěvky: 248
- Registrován: 17 srp 2013, 22:21
- 12
- Lokalita: Rheinland Pfalz Germany
- Stav: Offline
Re: I'm building an electronic hybrid of my Panther
Well,
Art in the closet must have been very exciting .....
Art in the closet must have been very exciting .....
APAMOTEC Model technologie v detailu
-
Edwin
Autor tématu
- PzKpfw IV

- Příspěvky: 248
- Registrován: 17 srp 2013, 22:21
- 12
- Lokalita: Rheinland Pfalz Germany
- Stav: Offline
Re: I'm building an electronic hybrid of my Panther
And off we went to the Panthers.
Since I want to start the engine using the remote control I built a simple switch from a low power and a button. Since the engines are no longer controlled by the electronics Tamiya enough this button with its switching capacity from perfect.

I have built in the same place the new one-switch on which he already was before, but the brushless motor due to a stronger one.

And so the Panthers now looks inside ..... what a lot of cable .....

The coordination between the regulators and the Tamiya Brushless electronics I have also done it to 90%. Only for right-handers, the motor will not sound like me, but I will still get through. What does not work is the excess flash and the MG LED, for whatever reason. But this has nothing to do with my conversion.
But since I have sooo much to do must last for the first Dernbach. That it is possible I have proven ......
And of course I also tested it in the garden ...

http://www.youtube.com/watch?v=5kO5xx2f ... e=youtu.be
Since I want to start the engine using the remote control I built a simple switch from a low power and a button. Since the engines are no longer controlled by the electronics Tamiya enough this button with its switching capacity from perfect.

I have built in the same place the new one-switch on which he already was before, but the brushless motor due to a stronger one.

And so the Panthers now looks inside ..... what a lot of cable .....

The coordination between the regulators and the Tamiya Brushless electronics I have also done it to 90%. Only for right-handers, the motor will not sound like me, but I will still get through. What does not work is the excess flash and the MG LED, for whatever reason. But this has nothing to do with my conversion.
But since I have sooo much to do must last for the first Dernbach. That it is possible I have proven ......
And of course I also tested it in the garden ...

http://www.youtube.com/watch?v=5kO5xx2f ... e=youtu.be
APAMOTEC Model technologie v detailu
-
mrst
- PzKpfw VI - Tiger

- Příspěvky: 3255
- Registrován: 09 úno 2009, 19:52
- 16
- Lokalita: Praha 9, Horní Počernice
- Stav: Offline
Re: I'm building an electronic hybrid of my Panther
tak to si budeš muset koupit Tamku a budeš mít pokoj na vždy!!!
-
Edwin
Autor tématu
- PzKpfw IV

- Příspěvky: 248
- Registrován: 17 srp 2013, 22:21
- 12
- Lokalita: Rheinland Pfalz Germany
- Stav: Offline
Re: I'm building an electronic hybrid of my Panther
Hi Balcin,
I just hope I understood it correctly, as your language for me always very twisted comes from the translator and I first everything until it is a few times turn sense to me.
Since I build things according to customer prices also arise from the wishes of the customers....
regards Edwin
I just hope I understood it correctly, as your language for me always very twisted comes from the translator and I first everything until it is a few times turn sense to me.
Since I build things according to customer prices also arise from the wishes of the customers....
regards Edwin
APAMOTEC Model technologie v detailu
-
zander
- PzKpfw VI - Tiger

- Příspěvky: 1448
- Registrován: 25 čer 2010, 18:47
- 15
- Lokalita: Praha 5 Radotín
- Stav: Offline
Re: I'm building an electronic hybrid of my Panther
balcin píše:..Kluci,zeptéjte se ho někdo,za kolik mě prodá tu vanu na tigra??..I s těma převodovkama...Sakra to by se mě líbilo a měl bych do smrti pokoj od vyčvachtání ramen a dalších věcí..Ta vana by mě to moje ježdění určitě vydržela,až do smrti..Vypadá velice krásně a pevně...Jen kolik stojí...
Stačí se kouknout v tématu three tiger, tam jsem se ho na to ptal, nicméně vana s torzními tyčemi komplet odpružení a vypínáky a převodovkami 620Euro /staví to pouze na zakázku/
střídavé motory se setrvačníky 160 EURO
Takže suma sumárum komplet vana bez kol s motory 780Euro x25,50 je 19890 CZK cca.
Takže si to můžeš klidně objednat.
Michal
"Rytířský v boji, bdělí v míru"
-
Edwin
Autor tématu
- PzKpfw IV

- Příspěvky: 248
- Registrován: 17 srp 2013, 22:21
- 12
- Lokalita: Rheinland Pfalz Germany
- Stav: Offline
Re: I'm building an electronic hybrid of my Panther
Thank you Michal,
the translation is still very difficult for me to understand. This will take some time until I can do better, but I'm learning.
regards Edwin
the translation is still very difficult for me to understand. This will take some time until I can do better, but I'm learning.
regards Edwin
APAMOTEC Model technologie v detailu
-
zander
- PzKpfw VI - Tiger

- Příspěvky: 1448
- Registrován: 25 čer 2010, 18:47
- 15
- Lokalita: Praha 5 Radotín
- Stav: Offline
Re: I'm building an electronic hybrid of my Panther
OK
Everyone is learning.
Michal
Everyone is learning.
Michal
"Rytířský v boji, bdělí v míru"
-
zander
- PzKpfw VI - Tiger

- Příspěvky: 1448
- Registrován: 25 čer 2010, 18:47
- 15
- Lokalita: Praha 5 Radotín
- Stav: Offline
Re: I'm building an electronic hybrid of my Panther
Tu ale nenapasuješ na HL /nebo po velkých upravách/,a že by byla o tolik kvalitnější se mi nezdá, musel by jsi jí ještě potom dost otunit a to je další problém, je to trochu jiný systém , a obávám se i trochu rozměr.balcin píše:Vládo a jak ta vana od té Tamky vypadá??..Nemůžeš tu dát na ni odkaz a kde ji koupím??..Díky..
Myslím si, že nejlepší východisko je koupit tu další od HL , jen jí přehodíš , jsou teď za super peníze a zase budeš nějákou dobu jezdit v klidu.
Michal
"Rytířský v boji, bdělí v míru"